Pilots and RC hobbyists tend to hit the same wall eventually: the battery is ready to fly, the field is waiting, and the charger in front of them either takes forever or refuses to balance cells properly. Choosing among 2s battery chargers means weighing connector type, charge rate, portability, and how many packs you need to keep alive between sessions. This roundup pulls ten solid options, from silicone balance leads to multi-bay DJI hubs, so you spend less time guessing and more time in the air.
The Main Contenders
FLY RC 22AWG 2S-6S Lipo Balance Charger Cable JST-XH Adapter Plug (10pcs)
Hanatora Air 2S, Mavic Air 2 Multi Parallel Charging Hub (4 Batteries + Remote)
OliRC JST-XH 2S-6S Silicone Balance Extension Cables (5pcs, 8 inch)
LYONGTECH 6-in-1 Rapid Multi Charging Hub for DJI Air 2S, Mavic Air 2
ACEIRMC JST-XH 2-6S Lipo Balance Board Adapter (2pcs)
Readytosky JST-XH Balance Board 2-6S Lipo Battery Charger (2PCS)
DJI Mavic Air 2 Car Charger – Drone Charging Accessory (Black)
HKY AC Adapter for DJI Mavic Air 2 / Air 2S Charger with USB-A Port
URGENEX 2S 7.4V 1-to-2 USB Charger Cable for SCX24 RC Cars
Hanatora Air 2S, Mavic Air 2 5-in-1 Wall & Car Charging Hub
A Deeper Look At The Lineup
Hobby benches tend to collect adapters the way kitchens collect takeout menus, and the FLY RC bundle cuts straight through that clutter. You get two of each JST-XH balance lead covering 2S through 6S packs, so the same drawer holds every common cell count without digging through old project boxes. The leads terminate in a standard balance-charger female plug, which means most modern hobby chargers accept them without modification.
Each cable runs 150mm of 22AWG silicone wire, which stays flexible in cold garages and resists the cracking that plagues cheap PVC leads after a season of use. For pilots running a fleet of mismatched LiPo packs, this is the kind of spare-cable kit that earns its keep the first time a lead goes missing.
Real Benefits
- Two leads per cell count, so a backup is always within reach when one wears out mid-session.
- Silicone jacket handles tight bends and cold-weather charging without stiffening up.
- JST-XH connectors match the balance port used by the vast majority of hobby LiPo packs.
- Ten-cable count covers 2S through 6S, eliminating the need to buy separate adapters per project.
Trade-Offs To Consider
- 150mm length is short for chargers mounted on tall shelves or inside enclosed bays.
- Silicone sheathing attracts lint and dust on a crowded workbench over time.
- No labeling on the leads, so sorting 2S from 6S by eye takes a moment.
Right Fit For
RC hobbyists running multiple LiPo packs across cars, planes, and drones who want one drawer to handle every balance connector they own.
Consider Something Else When
DJI Air 2S and Mavic Air 2 pilots managing flight batteries should look at the Hanatora Air 2S, Mavic Air 2 Multi Parallel Charging Hub instead.
Drone mornings go smoother when four flight batteries and the remote controller charge together instead of taking turns, and that is exactly what this Hanatora hub delivers. The unit accepts the DJI Air 2S and Mavic Air 2 packs side by side, recognizing both 13.2V and 12.6V batteries automatically without forcing you to flip switches between flights.
A full bank of four packs lands at roughly 110 minutes on the integrated power supply, which means you can rotate through most flying days on a single charge cycle. Foam pads on the bottom keep the hub from scuffing tabletops during travel, and the USB-A port handles the controller without slowing down the flight batteries.
A Strong Showing
- Four-bay design means a full set of flight packs charges in one pass.
- Auto voltage matching handles both 12.6V and 13.2V DJI batteries without manual selection.
- Integrated USB output keeps the remote controller in the same rotation.
- Wide 110-240V input works in hotel rooms and field outlets without a transformer.
Soft Spots Worth Knowing
- Limited to DJI Air 2S and Mavic Air 2 packs, with no compatibility for other drone models.
- Four-pack rotation only; fifth or sixth batteries need a separate bay.
- Charge brick runs warm under continuous load, so ventilation matters in a packed travel bag.
Made For
DJI Air 2S and Mavic Air 2 owners who fly multiple packs per session and want to land, swap, and take off again without babysitting a rotation of single chargers.
Skip It When
RC car or crawler hobbyists running 2S LiPo bricks should pick up the URGENEX 2S 7.4V 1-to-2 USB Charger Cable instead.
Some chargers live on high shelves or behind stacked gear, and that is where the OliRC extension set earns its place. Each cable adds 200mm of flexible silicone between the battery and the balance port, which keeps wear off the pack’s own balance lead when the charger is awkward to reach.
The set covers one lead each from 2S through 6S, so a single buy adds reach across every common cell count rather than locking you into one configuration. Silicone insulation stays pliable in cold workshops, and the 22AWG conductor handles the small balance currents used during cell monitoring without voltage drop concerns.
Bright Spots
- 200mm reach keeps the charger accessible without straining the pack’s native balance lead.
- Silicone jacket stays flexible in cold garages and resists kinking.
- One lead per cell count from 2S through 6S covers most hobby fleets.
- JST-XH plugs match the standard balance port found on the majority of LiPo chargers.
Less Ideal Details
- Only one extension per cell count, so a failure means waiting on a replacement.
- 200mm may still be tight for chargers mounted inside enclosed bays or cases.
Quick Facts
Best Suited To
Workshop-bound hobbyists whose chargers sit high on shelves or inside hard cases and need extra reach to avoid straining battery leads.
A Better Fit Elsewhere
Drone pilots running DJI Air 2S or Mavic Air 2 packs should pair the LYONGTECH 6-in-1 Rapid Multi Charging Hub with these extensions for bench flexibility.
Multi-battery drone sessions drain the field bag fast, and the LYONGTECH hub answers that with six ports in a roughly six-inch square footprint. It charges four DJI Air 2S or Mavic Air 2 flight batteries simultaneously while powering two USB devices, which is rare at this size class.
Status lights turn green when each bay finishes, so you can grab the first ready pack without watching the rest of the bank. Compared to the Hanatora Air 2S, Mavic Air 2 Multi Parallel Charging Hub covered earlier, this model adds the extra USB ports at a similar four-bay flight battery ceiling.
What Makes Sense
- Four flight battery bays plus two USB ports handle a full pilot kit in one unit.
- Red-to-green status indicators remove guesswork about which packs are ready.
- Compact six-inch footprint fits inside most drone backpack organizers.
- Universal 110-240V input works internationally without a step-down transformer.
Honest Caveats
- Around 110 minutes for four full packs, which is fine but not the fastest in the category.
- DJI-only compatibility, so pilots flying other drones need a separate charger.
- Plastic housing benefits from a padded sleeve during rough travel days.
Whose Shelf It Belongs On
Professional drone pilots flying DJI Air 2S or Mavic Air 2 packs daily who need a single hub that covers batteries, controller, and phone in one rotation.
Look Elsewhere When
Travel-focused pilots who want both wall and 12V car support in a single kit should consider the Hanatora Air 2S, Mavic Air 2 5-in-1 Wall & Car Charging Hub instead.
Chargers with a single balance port can feel limiting when packs of different cell counts pile up, and the ACEIRMC boards address that directly. Each board plugs into a charger’s six-cell balance port and breaks out individual connectors for 2S, 3S, 4S, 5S, and 6S LiPo packs, so one charger suddenly handles a mixed fleet.
You get two boards in the box, which is handy for keeping a dedicated board at the bench and a spare in the field kit. TP/FP connector support also covers Thunder Power and Flight Power packs that often complicate generic balance wiring.
The Good Stuff
- Five-cell-count breakout turns one balance port into a full-fleet solution.
- Two boards per pack cover both home bench and travel kit without swapping.
- TP/FP connector support opens compatibility with Thunder Power and Flight Power packs.
- Works with most hobby chargers that accept a standard JST-XH balance plug.
Practical Considerations
- Requires a compatible charger with a six-cell balance input, which excludes budget units.
- Bare board design needs careful handling to avoid bending the breakout pins.
- Two-pack count is light for shops juggling more than two simultaneous charging bays.
Who Should Grab It
DIY hobbyists who already own a multi-cell charger and want to expand its reach across 2S through 6S packs without buying a second charger.
Swap It Out When
RC racers looking for an out-of-the-box balance solution should consider the Readytosky JST-XH Balance Board 2-6S Lipo Battery Charger (2PCS) instead.
Race-day setups move fast, and a backup balance board can save a heats when the primary board takes a hit. Readytosky ships two boards in the box, each designed to plug into the six-cell balance port on a charger and break out connectors for 2S through 6S LiPo packs.
The design echoes the ACEIRMC boards covered earlier but ships as a dedicated pair aimed at racers and frequent fliers. Owners commonly report that the labeled cell-count headers reduce guesswork during quick pack swaps at the pit table.
Noteworthy Benefits
- Two boards per pack mean a working spare is always available during a race weekend.
- Labeled 2S through 6S headers speed up pack swaps when minutes count.
- Compatible with most chargers that accept a six-cell JST-XH balance plug.
- Compact footprint fits inside a typical pit bag or toolbox tray.
Small Limitations
- Requires a charger with a six-cell balance input for full compatibility.
- Plastic headers can crack under repeated rough handling at the track.
- Two-pack count may fall short for large race teams needing more bays.
Feature Card
Built With In Mind
RC racers and frequent fliers who want a labeled, ready-to-go balance board for each charging bay at the track or field.
Reach For A Different Pick When
DJI drone pilots managing flight batteries should grab the LYONGTECH 6-in-1 Rapid Multi Charging Hub instead.
Roadtrip pilots know that hotel-room outlets rarely cover a full day of drone flying, and that is where a 12V car charger earns its slot in the bag. The DJI Mavic Air 2 Car Charger plugs into a standard vehicle socket and tops up Air 2S or Mavic Air 2 batteries between locations.
Its compact housing weighs roughly 0.16 kg, which means it disappears into a drone backpack without adding noticeable bulk. Compared to the Hanatora Air 2S, Mavic Air 2 Multi Parallel Charging Hub, this unit sacrifices bay count for the freedom to charge away from any wall outlet.
Where It Excels
- Standard 12V vehicle socket input makes roadside top-ups practical between shoot locations.
- Light 0.16 kg weight keeps the travel bag manageable on long trips.
- DJI-branded compatibility removes uncertainty about firmware or battery handshake issues.
- Compact housing fits in tight glove boxes and organizer pouches.
Worth Bearing In Mind
- Single-bay design means longer total charge times for multi-pack days.
- Requires a running or accessory-position vehicle to deliver consistent power.
- Limited to Air 2S and Mavic Air 2 batteries, with no support for other drone models.
Perfect Match For
Traveling drone pilots covering long distances by vehicle who need to top up flight batteries between stops without hunting for a wall outlet.
Another Choice May Suit
Pilots who split time between hotel rooms and vehicles should consider the Hanatora Air 2S, Mavic Air 2 5-in-1 Wall & Car Charging Hub for combined coverage.
Replacement chargers rarely get noticed until the original goes missing, and the HKY adapter covers that gap for DJI Air 2S and Mavic Air 2 owners. It outputs roughly 37 to 38 watts through the standard DJI charging port while adding a built-in 5V USB-A port for the remote controller or a phone.
Universal 100-240V input works in most countries without a step-down transformer, which makes it useful for pilots who fly abroad. Compared to the DJI Mavic Air 2 Car Charger covered earlier, this unit trades vehicle flexibility for a reliable wall outlet solution.
Good Reasons To Consider
- Replacement-friendly design steps in when the original DJI brick is lost or damaged.
- Built-in 5V USB-A port keeps the remote controller powered during long charge sessions.
- Wide 100-240V input handles international outlets without an extra converter.
- Standard DJI charging port maintains compatibility with stock Air 2S and Mavic Air 2 batteries.
Points To Note
- Single-bay output means slower total turnaround for multi-pack days.
- Not a multi-bay hub, so pilots running four packs should pair it with a separate unit.
- USB-A port delivers standard 5V only, which excludes fast-charge tablets and laptops.
Technical Highlights
Who Will Love This
DJI Air 2S or Mavic Air 2 owners replacing a lost or damaged stock charger who want a single brick that handles both battery and remote.
Not Your Match When
Multi-pack pilots should look at the LYONGTECH 6-in-1 Rapid Multi Charging Hub for higher bay count in a single unit.
Small-scale RC runners and crawler fans deal with tiny 2S LiPo bricks that often charge one at a time, and the URGENEX cable handles two packs from a single USB port. It outputs 7.4V at 1A on each independent channel, which means two SCX24-style batteries can refill in parallel from a phone brick or power bank.
The 62.5cm cable gives enough slack to keep both packs on a desk without crowding, and the XH-3P connector matches the most common 2S balance plug in the crawler world. For most backyard setups, that’s enough to keep the trail session rolling.
Where It Delivers
- Two independent 7.4V channels charge a pair of small 2S packs in parallel.
- USB input works from a laptop, power bank, or wall adapter.
- XH-3P connector covers common 2S balance ports on SCX24 and similar crawlers.
- Compact 62.5cm cable stows easily inside a small parts drawer.
Trade-Offs To Consider
- Limited to 2S 7.4V packs, with no support for 3S or higher cell counts.
- 1A per channel is slower than dedicated hobby chargers for larger LiPo bricks.
- Requires a 5V 2A source to deliver full output on both channels.
Feature Snapshot
The Right Fit
Small-scale RC and crawler hobbyists running Axial SCX24 or similar 2S rigs who want a USB-powered cable that charges two packs at once.
A Better Fit Elsewhere
Pilots running 3S to 6S aircraft or drone batteries should choose the FLY RC 22AWG 2S-6S Lipo Balance Charger Cable JST-XH Adapter Plug for broader coverage.
Drone pilots who split time between hotels, homes, and vehicles benefit from a hub that handles both power sources, and the Hanatora 5-in-1 covers that gap. It bundles a wall adapter and a car charger adapter in the box, so the same unit moves between a 110-240V outlet and a 12V socket without buying extras.
The hub supports up to four DJI Air 2S or Mavic Air 2 batteries plus one remote controller simultaneously, and the auto-voltage matching handles both 12.6V and 13.2V packs in the same rotation. Compared to the Hanatora Air 2S, Mavic Air 2 Multi Parallel Charging Hub covered earlier, this kit adds 12V flexibility at the cost of one fewer battery bay.
Benefits That Matter
- Bundled wall and car adapters handle hotel, home, and vehicle charging from one kit.
- Four-bay plus remote controller coverage suits most day-long drone trips.
- Auto voltage matching supports 12.6V and 13.2V DJI batteries without manual selection.
- Wide 110-240V wall input works internationally without a separate converter.
Where It May Fall Short
- Five-port ceiling is tighter than the LYONGTECH 6-in-1 Rapid Multi Charging Hub.
- DJI-only compatibility excludes pilots flying other drone platforms.
- Car adapter cable length can feel short in larger SUVs and trucks.
Key Product Details
Right Fit For
DJI Air 2S or Mavic Air 2 pilots who split flying time between hotel rooms, homes, and road trips and want one kit that covers every outlet type.
Not Your Match When
RC hobbyists running LiPo packs for cars, planes, or boats should pick up the FLY RC 22AWG 2S-6S Lipo Balance Charger Cable JST-XH Adapter Plug instead.
Matching The Right Charger To Your Setup
Connector Type And Cell Count Compatibility
The first detail to nail down is connector type, because nothing else matters if the plug does not fit. Most hobby LiPo packs use the JST-XH balance connector, which is the standard supported across the FLY RC cable bundle, OliRC extensions, and both balance boards in this roundup. Drone-specific batteries, like those in the DJI Air 2S and Mavic Air 2 lineup, use proprietary ports that only the Hanatora, LYONGTECH, and HKY units in this list address. Matching cell count comes next, since a 2S charger cable will not properly balance a 6S pack and vice versa.
Charging Speed And Bay Count
For hobbyists, a single-bay charger is fine when you fly or drive once a week, but multi-pack pilots need hubs that handle three or four batteries at once. The Hanatora and LYONGTECH hubs deliver full banks in roughly 110 minutes, which suits day-long drone sessions. Crawler and small-scale RC fans running 2S packs benefit more from the parallel URGENEX cable than from a full multi-bay hub, since the packs themselves are smaller and the cycle times shorter.
Portability And Power Source
Where you charge matters as much as how fast. Wall-only adapters like the HKY brick work for home setups, while travelers gravitate toward the DJI Mavic Air 2 Car Charger or the Hanatora 5-in-1 Wall & Car kit. For workshop use, length and flexibility rule: the OliRC silicone extensions reach awkward charger positions without straining the pack’s native balance lead.
Picking With Confidence
Pitfalls Shoppers Hit
A common mistake is buying a charger or cable based on the drone or RC vehicle name without checking the actual connector type and cell count. DJI Air 2S and Mavic Air 2 batteries use a proprietary charging port, so generic JST-XH balance cables will not work on those packs. Another trap is overlooking input voltage, since some travel-friendly units require a separate step-down transformer for international outlets.
Where The Extra Money Goes
Higher-tier hubs like the LYONGTECH 6-in-1 and Hanatora 5-in-1 cost more because they bundle parallel charging electronics, voltage auto-matching, and dual power inputs into a single housing. The premium delivers real value when you fly multiple packs per session or split time between home and vehicle outlets. For hobbyists with one or two packs and a fixed bench setup, the FLY RC cable bundle or Readytosky balance boards deliver the core charging function without the extra bay count.
Frequently Asked Questions
Do All 2S Chargers Work With 6S Batteries?
No. A 2S-specific charger or cable is designed to balance a two-cell pack and will not safely handle the higher voltage of a 6S LiPo. Match the charger’s rated cell count to your battery before connecting anything.
Can I Charge DJI Air 2S Batteries With A Generic JST-XH Cable?
No. DJI Air 2S and Mavic Air 2 packs use a proprietary charging port, so generic JST-XH balance cables do not fit. Use a dedicated DJI-compatible hub or replacement adapter like the ones in this roundup.
Is Parallel Charging Safe For LiPo Packs?
Parallel charging is generally safe when packs share the same cell count, capacity, and chemistry, and when the hub includes proper balancing circuitry. Mixing pack types or charge states on the same parallel bank increases risk.
What USB Power Source Works With The URGENEX Cable?
The URGENEX 2S 7.4V cable needs a 5V 2A source to deliver full output on both channels. A standard phone charger, laptop port, or 10,000mAh power bank typically meets that requirement.
How Long Does A Full Charge Take On A 4-Bay Hub?
A full bank of four DJI Air 2S or Mavic Air 2 batteries typically lands at roughly 110 minutes on the Hanatora and LYONGTECH hubs. Actual time varies with remaining charge state and ambient temperature.
The Takeaway
Charging habits reveal a lot about how someone actually flies or drives, and the right hub or cable depends on pack count, connector type, and where the sessions happen. Multi-pack pilots lean toward the Hanatora and LYONGTECH hubs, road-trippers appreciate the car flexibility, and bench hobbyists benefit most from the silicone leads and balance boards. Match the charger to your real-world setup and the rest of the gear tends to fall into place naturally.